Guangdong Flight Electric Co., Ltd

High quality product, professional service, being the core supplier in household remote control industry!

Home > Exhibition > Content
Disassembly of the power adapter
- Mar 07, 2017 -

The upper and lower covers of the power adapter are molded or sealed with a strong adhesive without any screws, so they can only be cracked with violence. However, as long as the method properly, after the dismantling of the adapter can be restored to the original, do not carefully observe almost no traces of open.

 Place the power adapter on the side of the white paper, cut the gap between the upper and lower covers of the power adapter with an electric knife edge, and then hit the electric knife with a hammer to cut the electric knife from the upper and lower covers of the adapter. In the different positions of the gap between the upper and lower covers of the adapter, use the tip of the electric knife to be scratched along the gap. When the upper and lower covers are first split, the depth of the tool is deep and then the upper and lower covers of the adapter are separated.

Then open the case of the power adapter, you can see the adapter circuit outside the package with a copper shield, with a knife to cut the shielding tape on the tape, and then use the soldering iron shield and the internal circuit board connected to the two welding Point, you can remove the shield.

Shielding layer and the circuit board is also separated by a layer of thick plastic film, and then cut off the knife, you can see the circuit board of the true colors of the Lushan